electronics engineering Herald                                          
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
Processor / MCU / DSP
Memory
Analog
Logic and Interface
PLD / FPGA
Power-supply and Industrial ICs
Automotive ICs
Cellphone ICs
Consumer ICs
Computer ICs
Communication ICs (Data & Analog)
RF / Microwave
Subsystems / Boards
Reference Design
Software / Development kits
Test and Measurement
Discrete
Opto
Passives
Interconnect
Sensors
Batteries
Others

Date: 5th Jun 2011

20A, 25A, and 30A rated SMD fuses in 3812 size

Bel Fuse has released a new square ceramic surface-mountable SMM Series of 3812 size medium-blow fuses. SMD fuses with rated current values up to 30A and with voltage ratings up to 250VAC and 65VDC. RoHs-compliant, Pb-free and halogen free fuses are suggested for overcurrent protection in a broad spectrum of high-current applications in which a small form factor device is specified to optimize board space. Included among their most common usage is in the protection of high-current circuits (primary or secondary) of larger power supplies, as well as in the protection of (telecom) backplane structures from overloads or short circuits, which could disrupt an entire system. According to Bel Fuse the SMM fuse can isolate a specific section or circuit, allowing the remaining circuits to function normally.

Offered with 20A, 25A, and 30A ratings, Bel's SMM Series features an operating temperature range of -55 degrees C to +85 degrees C with proper derating. At 100% of ampere rating, opening time is 4 hours minimum; 60 seconds maximum at 200% of ampere rating. Fuses are manufactured of ceramic bodies with matte tin plated brass caps. Parts are provided on 13" reels, 2,000 per reel. For additional information, visit http://belfuse.com/Data/Datasheets/SMM.pdf.

In production quantities, per-piece pricing for the square ceramic surface-mountable SMM Series of 3812 size medium-blow fuses ranges from $0.25 to $0.40 each. Samples are available from stock. Average lead time is 6 -8 weeks ARO.


 
Xilinx 7 series FPGA
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
©2010 Electronics Engineering Herald